Technology
Build Volume
Material diameter
Layer resolution
Traveling speed
Build plate
Material types
Nozzle diameter
Hot end temperature
Hotend heating time
Material storage
Connectivity
Build plate leveling
External dimensions of the printer
(with Bowden tube and coil holder)
Weight
Packaging dimensions
Power requirements
Environmental conditions of operation
Printer storage conditions
Firmware
Recommended slicer
Supported Operating System
File types for slicer
Fused lament fabrication
120 x 140 x 120 mm
1,75 mm
Nozzle 0,4 mm: 50-300 mícrons
150-200 mm/s
Acrylic plate
PLA, Wood and Metal Filaments,
Flex, PETG
0,4 mm
180–275°C
< 2 min
Filament spool holder
SD card, USB
Manual - rmware assisted
24x30x40cm
4,8 Kg
23x32x18cm
In AC 100-240V, 1,2A, 50/60Hz
Out DC 12V, 8A
15 - 30 °C, 10 - 90%
5 - 35 °C
Marlin based rmware
Cura
Windows, Mac, Linux
STL, OBJ
Environmental Conditions
Software
Introduction02
Properties
Dimensions
To Next Page
Loading...
