Need help?Do you have a question about the Blocks ZERO and is the answer not in the manual?
Essential safety guidelines for operating the Blocks Zero printer.
Step-by-step guide to load filament into the 3D printer.
Procedure to ensure the build plate is perfectly leveled for printing.
Instructions for selecting and initiating a print job.
How to change filament material or color during operation.
Instructions for cleaning accumulated debris from the nozzle.
General| Build Volume | 150 x 150 x 150 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB, SD Card |
| Frame Material | Aluminum |
| Supported Materials | PLA, ABS, PETG, TPU |
| Heated Bed | Yes |
| Bed Temperature | Up to 100°C |
| Display | LCD |
| Machine Weight | 8 kg |
| Technology | FDM (Fused Deposition Modeling) |
| Layer Resolution | 0.05 - 0.3 mm |
To Next Page
