Blodgett CTB - Page 26

Operation
22
IQ Control
SYSTEM PROGRAMMING (continued)
KEY PRESS DISPLAY ACTION
S Press the LEFT or RIGHT arĆ
row keys to select a tone level.
At each level the controller will
continuously sound the seĆ
lected tone.
S Press the P" key to lock in
your entry
TONE LEVEL
(None, 1, 2, 3, 4)
Set Tone Level
5
S Press the LEFT or RIGHT arĆ
row keys to select the method
that all temperatures will be
displayed in.
S Press the P" key to lock in
your entry
TEMPERATURE
F = FAHRENHEIT or
C = CELSIUS
Set Temperature Mode
6
S Type in the length of hold time
required. The value is in the
range of 00:00 to 99:59.
S Press the P" key to advance
to the next stage or parameter.
HOLD TIME
HH:MM
Set Hold Time
8
S Type in the desired Hold temĆ
perature. Hold Temperature
Range is 140Ć210°F
S Press the P" key to advance
to the next stage or parameter.
HOLD TEMP
XXX
Set Hold Temperature
9
S Type in the length of time. The
rang is 20 seconds to 2 minĆ
utes
S Press the P" key advance to
the next stage or parameter
MM:SSQty Prompt Time
7
S Press the LEFT or RIGHT arĆ
row keys to select Hold Done.
S Press the P" key to advance
to the next stage or parameter.
HOLD DONE
(AUTOMATIC, MANUAL)
Set Hold Done
10