Blodgett Mark V - Page 26

Operation
22
Blodgett IQ2T Vision Control
MANAGER LEVEL PROGRAMMING
Entering the manager programming mode
1. Press and hold the PROGRAM KEY (3). The
display reads:
Prod Cnt
Programming
Use the PROGRAM ARROW KEYS (4) to highĆ
light Programming. Press the PROGRAM KEY
(3) to select. The display reads:
ENTER CODE
Use the PRODUCT KEYS (14) to enter the proĆ
gramming access code 6647. Press the PROĆ
GRAM KEY (3). The display reads:
System
ProdName Lib
Programming the MANAGER SYSTEM options
1. With System highlighted, press the PROĆ
GRAM KEY (3) to select. The display reads:
Appliance Type
XXX
Use the PROGRAM ARROW KEYS (4) to highĆ
light electric half, electric full, XCEL, gas half or
gas full. Press the PROGRAM KEY (3) to select
the correct appliance type.
2. The display reads:
Language
XXX
Use the PROGRAM ARROW KEYS (4) to seĆ
lecteither English or Other. Press the PROĆ
GRAM KEY (3) to select the desired language.
3. The display reads:
Tone Volume
XXX
Use the PROGRAM ARROW KEYS (4) to seĆ
lect None, 1, 2, 3 or 4. Press the PROGRAM
KEY (3) to select the desired level for all audiĆ
ble signals.
4. The display reads:
Temperature
XXX
Use the PROGRAM ARROW KEYS (4) to seĆ
lect either F or C. Press the PROGRAM KEY (3)
to select the desired temperature units.
5. The display reads:
Hold Time
XXX
Use the PRODUCT KEYS (14) to enter the
length of hold time for the manual hold button.
Press the PROGRAM KEY (3).
If a time of 00:00 is enter skip to step 6.
If a hold time is entered the display reads:
Hold Temp
XXX
Use the PRODUCT KEYS (14) to enter the hold
temperature for the manual hold button. Press
the PROGRAM KEY (3). The display reads:
Hold Done
XXX
Use the PROGRAM ARROW KEYS (4) to seĆ
lect either AUTOMATIC or MANUAL. Press the
PROGRAM KEY (3). The display reads:
Hold Fan Speed
XXX
Use the PROGRAM ARROW KEYS (4) to seĆ
lect HIGH or LOW. Press the PROGRAM KEY
(3).