Operation
23
Blodgett IQ2T Vision Control
6. The display reads:
Setback Time
XXX
Definition - Setback time is an energy
savings feature that automatically lowĆ
ers the cavity temperature when the
oven is idle.
Use the PRODUCT KEYS (14) to enter the
length of the time the oven is idle before enterĆ
ing setback mode. Press the PROGRAM KEY
(3).
If a time of 00:00 is enter skip to step 7.
If a setback time is entered the display reads:
Setback Temp
XXX
Use the PRODUCT KEYS (14) to enter the setĆ
back temperature. Press the PROGRAM KEY
(3).
7. The display reads:
Shelf Sense
XXX
Definition - If you are using sensitivity
as a timing mode for single stage stage
recipes this feature must be turned on.
Use the PROGRAM ARROW KEYS (4) to seĆ
lect either Yes or No. Press the PROGRAM
KEY (3).
If no is selected skip to step 8.
If yes is selected the display reads:
Shelf 1 Sens
XXX
Use the PRODUCT KEYS (14) to enter a sensiĆ
tivity level of 1Ć9 for shelf 1. Press the PROĆ
GRAM KEY (3). Repeat for shelves 2Ć5.
8. The display reads:
Preheat Time
XXX
Definition - This function programs
time for the oven to idle after reaching
the preheat temperature allowing heat
to saturate the oven cavity. The preheat
time only applies to the initial preheat
after a cold start. This is strictly a
prompt, the user may begin a bake
cycle even with the preheat prompt disĆ
played.
Use the PRODUCT KEYS (14) to enter a preĆ
heat time. Press the PROGRAM KEY (3).
To Next Page
Loading...
