5-18
Charging Error
If charging did not commence and you have a charging error:
Check the Power LED on the charger to verify that the power supplied to the charger is ON.
Check the charger paddle to be sure it is plugged in properly to the charge port on the bus.
Verify charging has begun by checking the Charging LED on the battery charger.
Check that “Charger Connected” and “Time To Full Charge” is displayed in the message display.
NOTE: If your bus is not going to be used for an extended period of time (more than 7 days), it is advisable to NOT leave it
plugged into charger.
To Next Page
Loading...
