6-10
Pre-Trip Inspection: Interior
Name:
Date:
ITEM
INSPECTION - Driver Area Alerts
Insert the ignition key and turn it to first ON position.
All instrument panel lights and the Message Display Center illuminate.
PASS FAIL
1 Scan the lights for any that do not illuminate.
2 Check for audible alerts.
3 Check message display center for error codes.
4 Check the condition of the battery charge as indicated by the instrument panel voltmeter.
5 Turn on and check the interior dome lights.
6 Check condition and function of emergency windows, roof hatches, or latched emergency door vandal lock.
7 Check for proper operation of equipment switches in the upper panel of the side console.
8
Operate all of the exterior lights and verify that they are all working properly.
Include all running lights, marker and clearance lights, and warning lights.
9 Check interior mirror for damage and proper adjustment to provide a clear view of the rear of the bus.
10 Check for proper front and rear air pressure. Check air pressure loss (< 3 psi) during 1 minute service brake application.
To Next Page
Loading...
