Blue Bird Vision 2021 - Seat Assembly Removal and Cushion Disassembly

4-8
DRIVERS HANDBOOK
To lower the cushion assembly back to its normal use position, pull tool outward toward aisle to release the latch, and gently lower
the cushion ensuring it latches into its normal position. To remove tool from latch: push tool inward while rotating counter-clockwise
until it releases from plunger, then pull tool out of tilt latch socket.


WARNING!
WARNING! Seat cushions must be latched in the horizontal seated position whenever the bus is in operation.
Proper inspection and maintenance must be routinely performed to ensure safe use and operation of passenger
seats and restraints. Follow the Seat Belt Inspection And Maintenance section of the Care and Maintenance
Chapter of this book.
Seat Assembly Removal and Cushion Disassembly
Technician instructions for removing NextGen Seat assemblies from the bus, and for disassembling the Cushion Assembly from the
Back Assembly in order to convert the seats to alternate belt types, are provided in 2019 and later Service Manuals.