6-13
PRETRIP INSPECTIONPRETRIP INSPECTION
Prepare For Driveaway
Return to the Driver’s seat.
A. Adjust the seat height, back, and position.
B. Adjust the steering wheel position as needed. See Steering Wheel Position under Steering Column.
C. Check the alignment and positioning of all rearview mirrors, interior and exterior for optimum view. Adjust as necessary..
Mirrors and Mirrors Adjustment
Inside rearview mirrors can be adjusted by loosening the bolts and nuts in the slotted holes on
the mirror brackets. Because this is a friction mount, periodic tightening of these bolts and nuts
may be required. Adjust the mirror to give the operator a clear view of the bus interior and the
roadway to the rear.
Back-Up Camera
When the bus is shifted into reverse, a display for the back-up camera will be activated and appear
in the LH side of the interior rearview mirror giving the driver a view behind the bus.
Periodic tightening
may be required
Interior Mirror Bracket
Back-Up Camera display shown activated
To Next Page
Loading...