Blue Bird Vision 2021 - Page 121

6-5
PRETRIP INSPECTIONPRETRIP INSPECTION
Zone 4: Driver Compartment Area
Sit in the driver’s seat.
- Verify that the shifter is no longer illuminated.
- Insert the key in the ignition and start the bus.
- DO NOT put on the seat belt and DO NOT close the entrance door.
- Firmly press the brake pedal, disengage the parking brake and press the “D” or “R” on the gear selector.
- Warning indicators should ash on the dash, audible alarms should be heard and the bus should not move.
- Press “N” on the gear selector, set the parking brake and release the brake pedal.
While still sitting in the driver’s seat,
- Put on the seat belt and DO NOT close the entrance door.
- Firmly press the brake pedal, disengage the parking brake and press “D” or “R” on the gear selector.
- Warning indicators should ash on the dash, audible alarms should be heard and the bus should not move.
- Press “N” on the gear selector, set the parking brake and release the brake pedal.
With the seat belt still on, close the entrance door.
- Firmly press the brake pedal, disengage the parking brake and press “D” or “R” on the gear selector.
- The bus should not display any warnings on the dash and no audible alarms should be heard.
- Slowly release pressure on the brake pedal and the bus should move.
- Verify that the Pedestrian Alert Device is working by increasing vehicle speed gradually until the sound is clearly audible.
- The bus is now ready for operation.
Zone 1
Zone 2
Zone 4
Zone 3