Blue Clean AR142S - OPERATING INSTRUCTIONS; Powering Up the Unit

13
Fig. 18
OFF/0
ON/I
OFF/0
ON/I
oPerating inStrUctionS
*!Turn on the water supply at the faucet.!* (Fig. 17)
Powering Up
• Make sure the “ON/OFF” switch is in the “OFF” position. The power switch has international
symbols for ‘on’ and ‘off’: On (|) Off (O), (Fig. 18 ).
• Unwind the power cord completely and plug the GFCI into a grounded 120 volt outlet. Press the
‘reset’ button on the GFCI box (Fig. 19). The indicator window should show a red color. This must
be done each time the unit is plugged in.
Fig. 19
Fig. 17