Blue Clean AR388 - Operating Instructions: Setup and Connection; Connecting High Pressure and Garden Hoses; Attaching Lance and Nozzle to Gun

Operating Instructions and Parts List AR388
6
www.ar-blueclean.com
3. Install non-threaded end of
high pressure hose to gun.
4. Press release button on bottom
of gun toward back of the gun,
then insert high pressure hose.
5. Insert lance into the gun by
pushing and turning clockwise
at the same time.
6. Push and turn counterclockwise
to remove.
7. Remove shipping cap from
front of pressure washer.
• Pressure washer is not meant
to pump hot water. NEVER
connect it to a hot water supply
as it will significantly reduce the
life of the pump.
• NEVER store the pressure
washer outdoors or where it
could freeze. The pump will be
seriously damaged.
• Release trigger when changing
from high to low pressure
modes. Failure to do so could
result in damage.
Keep hose away
from sharp
objects. Bursting hoses may cause
injury. Examine hoses regularly
and replace if damaged. Do not
attempt to mend a damaged hose.
1. Remove shipping cap from back
of pressure washer.
2. Install threaded end of high
pressure hose by pushing into
back of pressure washer then
turn clockwise until tight.
SerVicinG of a doUble-
inSUlated aPPliance (cont)
oPeratinG inStrUctionS
Pump
Hose
Garden
Hose
Adapter
High Pressure Hose
Pump