Customizing your Dash
© BlueFire LLC ↑ Go to the top Version 3.3 | Page 33
5. Set the Gauge Size 'Height' to the vertical line length.
6. Set the Gauge Size 'Width' to the vertical line width.
7. Check either the Borders 'Top' or 'Bottom'. Uncheck the others.
8. Set the Borders 'Width' to the Gauge Size 'Width' (vertical width).
Create a Horizontal Line
Here's how you create a Horizontal line to use in your custom dash:
1. Add one of the generic Text gauges (Text 1-20).
2. Go to Customize Gauges and select the Text gauge.
3. Clear the Text field.
4. A box will be created as described above.
5. Set the Gauge Size 'Width' to the horizontal line length.
6. Set the Gauge Size 'Height' to the horizontal line width.
7. Check either the Borders 'Left' or 'Right'. Uncheck the others.
8. Set the Borders 'Width' to the Gauge Size 'Height' (horizontal line width).
Add a Navigation Map Gauge
You can add a navigation map gauge to your custom dash by following these steps:
1. Add one of the generic Text gauges (Text 1-20).
2. Go to Customize Gauges and select the Text gauge.
3. Check the Navigation Map option.
4. Lock or unlock the map gauge. Note, an unlocked map will not show the map but will allow
for moving and resizing using panning and pinch to zoom.
5. A locked map will be shown on your dash using the native mapping service (Apple, Google,
Bing).
6. If you're using an Apple or Windows 10 device and you want to use Google Maps for
navigation, go to the Settings page and check the Show Google Maps option.
7. Tapping the locked map on your dash will show the selected navigation page.
Add your own Images
You can add images to your custom dash by following these steps:
1. Add one of the generic Text gauges (Text 1-20).
2. Go to Customize Gauges and select the Text gauge.
3. Scroll down and tap Text Images.
4. Browse and select your image file (png or jpg).
To Next Page
Loading...