Customizing your Dash
© BlueFire LLC ↑ Go to the top Version 3.3 | Page 41
section. This allows others to better understand your custom dash when you share it. If you use
group numbers in your custom dash, make sure you state in the notes what the group numbers
are assigned to.
Sharing your Dash with a Friend
You share your dash with a friend by using the 'Share Custom Dash' option. This option will email
your friend your dash. If you have images in your dash, the email will attach up to five of those
images.
To receive a dash from a friend, you use the 'Import Custom Dash' option. But first, you must copy
the dash you received from your friend's email to either a folder on your device or to iCloud for
Apple devices. You'll need to copy any images also. Importing the dash will allow you to browse
for your friend's dash you just copied and then import it as your current dash. If you select an
image file for importing, that image will be included in your dash.
Note, you can also make a backup copy of your dash by sharing it with yourself.
Sharing your Dash with Everyone
You can share your custom dash with everyone by using the 'Upload Custom Dash' option. This
option will save your dash first then take a screenshot of it. Your uploaded dash will be stored in
the BlueFire Dash Repository and be made available to everyone. Any Text gauge images will also
be stored. You will be credited as the author of your dash by your email address so others can
contact you about your dash.
To view all shared dashes in the BlueFire Dash Repository you use the 'Download Custom Dash'
option. This option will show all shared dashes for the current orientation of your device. You can
select a dash by tapping on it and it will be downloaded and installed as your current dash.
Trips and Fuel Fill
You can start a trip from the Trip page and monitor it on your custom dash. The trip Text gauges
will update on your dash as you drive.
For the fuel gauge, fuel remaining, and distance remaining gauges, you can either use your fuel
gauge reading from the ECM or tell the App when you have filled your tank.
To use the manual fuel fill option you must turn it on in the Fuel Tanks page (from Settings). You
can then indicate that you have completely filled your tank ('Fuel Fill Up' button), or you can enter
a partial fill in gallons or liters ('Partial Fuel Fill Up' button). The partial fill allows for negative
values to either correct a mistake or to initially set the tank level.
To Next Page
Loading...