Customizing your Dash
© BlueFire LLC ↑ Go to the top Version 3.3 | Page 37
2. You should now be in the View Dash page with all your gauges stacked up in the corner
and your Next/Prev gauges where you want them and locked.
3. Now, this is where it gets different because right now you can't move any gauges since
your dash is a scrollable dash.
4. Tap any unlocked gauge and scrolling will be turned off. A notification message will be
displayed indicating scrolling is off.
5. You can now Drag & Drop or Pinch to Zoom any unlocked gauge.
6. Move your first page gauges out of the way as you'll design the first page last.
7. Move all other gauges down and off the first page. You can't scroll but you can swipe them
off the page.
8. Tap the 'Next Page' button.
9. Move all the second page gauges out of the way and move the next pages gauges off the
bottom of the page (similar to what you did on the first page).
10. Repeat this procedure for each additional page.
11. On you last page, design the gauges for that page.
12. Use the 'Prev Page' button to go to the previous page.
13. Design the gauges for that page.
14. Repeat this until you're on the first page.
15. Design the gauges for the first page.
16. Tap any unlocked gauge to turn scrolling back on. A notification message will be displayed
indicating scrolling is on.
17. You should now be able to scroll through your dash and use the Next/Prev page buttons.
18. Go back to the Customize Dash page and lock your dash.
To add a gauge to an existing multi-page dash, follow these steps.
1. Add your new gauge.
2. Go to the View Dash page.
3. Tap the new gauge to go into 'Drag & Drop' mode.
4. Move the gauge past the bottom of the page.
5. Tap the 'Next Page' button.
6. Repeat the above two steps to get to the page you want.
7. Place the gauge where you want it.
8. Tap the new gauge to go back to scroll mode.
9. Don't forget to either lock the new gauge or re-lock your dash.
Note, at any time things get a little messed up, just leave the View Dash page and come back in.
To Next Page
Loading...