Disposal of Electric and Electronic Equipment
(Applicable in the EU and other European countries with separate collection systems)
This device contains electric parts; therefore, it cannot be disposed of as normal household
waste. Instead, it should be taken to your respective collection point for community recycling,
your local waste company, or the store where you originally purchased your device.
1. Registration and Declaration - EEE manufacturers are required to register with the National
Authority in each EU member state where they market products. The contact points for every
member state are published on the europa.eu website. Each member state authorizes private
organizations to register producers and to collect and prepare materials for recycling.
A common method has been established per 2017/699 for the calculation of the weight of EEE
put into the market for each EU member state along with an associated method for the calcula-
tion of the quantity of WEEE generated in each EU member state. The EU has WEEE calculation
tools customized for each one of the member states.
If you manufacture a product in the EU but export 100% of it to non-EU markets, then your
organization is not considered to be a manufacturer for the purposes of the WEEE Directive.
However, if any portion of the production is sold within the EU, the company is a considered to
be a producer under EU WEEE regulations.
WARNING: This device contains a neodymium magnet. Magnets could affect the functioning
of pacemakers and implanted heart defibrillators. If you use these devices, keep sufficient
distance from the magnet. Warn others who wear these devices from getting too close to
magnets. Magnet may lose part of its adhesive force permanently if exposed to temperatures
above 1750F (800C). Magnets produce far-reaching, strong magnetic fields. They could damage
TVs and laptops, computer hard drives, credit and ATM cards, data storage media, mechanical
watches, hearing aids and speakers. Keep unit away from devices and objects that could be
damaged by strong magnetic fields.
ISED STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) This device may not cause interference, and (2) This
device must accept any interference, including interference that may cause undesired operation
of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
21ENGLISH
COMPLIANCE
To Next Page
Loading...