46
Just Power On
● Enter the setting section as Figure 1 to set the DC input source to 'Others' to
activate lead-acid battery charging, with the max current of 8.2A.
Note: Accessory 9 is for charging the AC200MAX only. DO NOT use it for other
purposes, like charging the lead-acid battery. Any injury or damage caused by
failure to follow instructions will NOT be compensated.
5
9
(6) Dual Charging
● Set the 'DC Input Source' to 'PV' to achieve AC + PV Dual Charging.
● Set the 'DC Input Source' to 'Others' to achieve AC + Adapter/Lead-Acid
Battery Charging.
Others
(220-240V Version)(100-120V Version)
To Next Page
Loading...
