45
BLUETTI
solar charging will be wasted.
3 5
(3) From the car cigarette lighter port
● Connect the AC200MAX to the cigarette lighter port of the car via the car
charging cable.
● Enter the setting section as Figure 1, set DC input source to 'Others'.
● The input current of car charging requirement: 8.2A
5
4
(4) From the generator (gasoline, propane, or diesel)
● Connect the AC adapter input plug to the generator and the output to the
AC charging port of AC200MAX.
● Press the power button; the product will start charging. When it gets fully
charged, the charging will automatically stop.
2
(5) From the lead-acid battery
● Connect the AC200MAX with a lead-acid battery via the charging cable
(Accessory 9).
Note: pay attention to distinguishing the positive and negative poles of the
battery. The red end indicates the positive pole.
To Next Page
Loading...
