21
Just Power On
8.1.1. Charging Method 1: From Wall Outlet (by AC charging cable)
Connect EP500 from CP1 via AC charging cable to the AC wall outlet @600W Max.,
the charging process will automatically stop when it reaches 100% capacity.
8.1.2. Charging Method 2: From Generator (gasoline, propane, or diesel)
● Connect the EP500 from CP1 via the generator charging cable (sold spearately)
to the AC output of the generator. The charging process will automatically stop
when it reaches 100%.
● The required output power of your generator has to exceed the Max. input
power of the AC input port of the EP500. Also a generator with a pure sine
wave output is recommended (e.g. Inverted-based Generators)
Voltage limit: 90V-264V Frequency limit: 47Hz-63Hz
To Next Page
Loading...
