Bluetti EP500 - Split Phase Function

31
Just Power On
10.2.4. Customized UPS
● Charge/discharge time, and High/Low Battery SOC can be set at Customized UPS.
●Disable the grid charge setting, EP500 will not be able to be recharged by grid.
● Apart from Time Control UPS, the main switch of grid charging and time mode
settings are involved. The setting of turning the grid/time setting ON/OFF will take
eect on both PV Priority Mode, Standard UPS Mode, and Time Control Mode.
11. Split Phase Function
●The “Machine Type” setting on screen is used to enable or disable Split Phase
output.
Split-Phase output is achieved by bonding two EP500 into one power system to
double the available output power, voltage, and capacity.
● “Split Phase” is only used for connecting both *2 EP500 together (exclusive for the
100-120V version of the EP500). A Fusion Box is required (sold separately).