24
BLUETTI
Charging Method 5: Supports charging the EP500 with CP1 and CP2 at same
time. You can use any charging methods listed previously, simultaneous,
to maximize charging power input. They are listed here again for your
convenience. Select one method for CP1 and one method for CP2 for
simultaneous charging.
CP1 Charging Port Select:
Method 1: GEN charging cable
Method 2: AC charging cable
CP2 Charging Port Select:
Method 3: T500 charging adaptor
Method 4: Solar panels
8.4. How to calculate the recharging time of EP500
5120Wh / Total recharging power + 0.5-1Hrs (trickle charging time) = fully
charging time estimation
E.g. : The total recharging power is 1100W(500W+600W) recharged by AC and
2nd adapter at same time, the estimation charging time will be 5.13-5.63Hrs.
09. Discharge (OUTPUT)
The operational time of the EP500 is subject to many dierent factors such
ambient temperature, discharge rate, remaining battery capacity, and other
factors.
9.1. The Output Port
9.1.1. AC Output Port
●EP500 is equipped with *4 AC(US, JP version) / *3 AC(AU,EU,UK) outputs
with a continuous 2000W Max. power of output in total, and the ability to
support surges up to 4,800W.
To Next Page
Loading...
