23
Just Power On
●For Roof Panels:
If you choose roof panels to be the solar power source to recharge EP500, easily
connect your roof panel with MC4-Aviation to EP500 will nish the installation.
PV Module (additional accessories) is required to drop down the voltage if the
open circuit voltage produced by your roof panels exceeds the limit of EP500
can handle: 55-145VDC, 20A.
This PV module doesn’t work with solar panels that have built-in
microinverters, or open circuit voltage over 550V.
Please check BLUETTI Youtube channel: BLUETTI Ocial for detailed
instruction video.
( PV Step Down Module )
8.3. Dual Charging
( CP1 ) ( CP2 )
To Next Page
Loading...
