Installation must comply with applicable local plumbing codes
and regulations.
Connect the water purifier to an earthed electrical supply. Use
a plug that is easy to access after installation. Only an approved
electrician must do permanent wiring on the system. A safety
switch must be installed on the system. Incorrect installation
can lead to damage, or make the water purifier dangerous to
use.
Do not use the power cord if there are visible signs of damage
on it. If the power cord is damaged, a qualified electrician must
replace it in order to prevent danger.
Do not use Pro without a filter. To do so can cause damage.
When Pro is cleaned or put in storage, the filter can be
removed.
If the water purifier is disconnected from water and electricity for >5 days, store it as
described in Complete User manual “Storage”.
To Next Page
Loading...
