BluStream MFP62 User Manual

www.blustream.com.au | www.blustream.co.uk
MFP62 USER MANUAL
10
RS-232 COMMAND DESCRIPTION
EDID xx CP yy
Set Input xx EDID Copy From Output yy
EDID xx DF zz Set Input xx EDID To Default EDID zz (EDID Dip Switch Must Be Switched To EDID Soware)
xx=00: Select All INPUT Port
xx=[01...06]: Select One INPUT Port
yy=[01...02]: Select One OUTPUT Port
ss=[01..02]: User EDID Memory
zz=00: HDMI 1080p@60Hz, Audio 2ch PCM(Default)
zz=01: HDMI 1080p@60Hz, Audio 5.1ch DTS/DOLBY
zz=02: HDMI 1080p@60Hz, Audio 7.1ch DTS/DOLBY/HD
zz=03: HDMI 1080i@60Hz, Audio 2ch PCM
zz=04: HDMI 1080i@60Hz, Audio 5.1ch DTS/DOLBY
zz=05: HDMI 1080i@60Hz, Audio 7.1ch DTS/DOLBY/HD
zz=06: HDMI 1080p@60Hz/3D, Audio 2ch PCM
zz=07: HDMI 1080p@60Hz/3D, Audio 5.1ch DTS/DOLBY
zz=08: HDMI 1080p@60Hz/3D, Audio 7.1ch DTS/DOLBY/HD
zz=09: HDMI 4K@30Hz 4:4:4, Audio 2ch PCM
zz=10: HDMI 4K@30Hz 4:4:4, Audio 5.1ch DTS/DOLBY
zz=11: HDMI 4K@30Hz 4:4:4, Audio 7.1ch DTS/DOLBY/HD
zz=12: HDMI 4K@60Hz 4:2:0, Audio 2ch PCM
zz=13: HDMI 4K@60Hz 4:2:0, Audio 5.1ch DTS/DOLBY
zz=14: HDMI 4K@60Hz 4:2:0, Audio 7.1ch DTS/DOLBY/HD
zz=15: HDMI 4K@60Hz 4:4:4, Audio 2ch PCM
zz=16: HDMI 4K@60Hz 4:4:4, Audio 5.1ch DTS/DOLBY
zz=17: HDMI 4K@60Hz 4:4:4, Audio 7.1ch DTS/DOLBY/HD
zz=18: DVI 1280x1024@60Hz, Audio None
zz=19: DVI 1920x1080@60Hz, Audio None
zz=20: DVI 1920x1200@60Hz, Audio None
zz=21: HDMI 1920x1200@60Hz, Audio 2ch/5.1ch PCM
zz=22: User EDID 1
zz=23: User EDID 2
EDID SAVE yy TO ss Save Output yy EDID To User Memory ss
AUD SCA ORG Scaler Audio Input Follow Port Selection
AUD SCA ANA Scaler Audio Input From Analog L/R Signal
AUD PCM SCA/BYP When Input PCM Audio, Use Scaler To Process Or Just
Bypass To Output. Bitstream Audio Always Bypass
HDMI1 And VGA Input Audio Always Use Scaler
AUD RX yy ORG RX Input yy Use Orginal HDMI/DVI Signal
AUD RX yy ANA RX Input yy Embeded Analog L/R
yy=[01...05]: 01:HDMI1 02:HDMI2 03:HDMI3 04:DP 05:USB-C
VOL xx Set Scaler Audio Volume
xx=[00...100]: Volume Value
xx=+: Volume Increase
xx=-: Volume Decrease
MUTE ON/OFF Set Scaler Output Audio Mute ON Or OFF
MIC MIX mm Set MIC And Background Audio Mix Mode
mm=ON: Mix MIC And Background Audio
mm=BGO: Background Audio Only
mm=MICO: MIC Audio Only
MIC VOL xx Set MIC Input Audio Volume
MIC MUTE ON/OFF Set MIC Mute On Or O
MIC AUTOBG ON/OFF Set Auto Decrease Background Audio On Or O When Detect MIC Signal
MIC BGVOL pp Set Auto Decrease Background Audio To pp Percent Of “VOL xx”
pp=[00...100]: Percent Of “VOL xx” Setting
MIC BGR dd Aer Speaking, The MIC Takes dd Seconds To Raise The Volume
dd=[01...20]: Delay Seconds
MIC RUP rr Set Ramp Up Background Audio Volume For rr Seconds
MIC RDN rr Set Ramp Down Background Audio Volume For rr Seconds
rr=[00]: Instant Ramp, No Delay
rr=[01...20]: 0.5s Increment

BluStream MFP62 Specifications

General

Brand	BluStream
Model	MFP62
Category	Switch
Language	English