www.blustream.com.au | www.blustream.co.uk
MFP62 USER MANUAL
08
Remote Control Description
Source Selection
Selects the source input you wish to view (HDMI 1, HDMI 2, HDMI 3, DisplayPort™,
USB-C, VGA)
Audio Selection
The MFP62 supports embedding analogue audio over the source input’s audio.
Select the Embed button to enable this function, and Bypass to disable this and
allow the source audio to pass through.
EDID Setup
The MFP62 provides a comprehensive range of EDID settings. To deploy the
desired EDID setting when using the supplied remote, simply select the button
correspnding to the desired video resolution. Note that audio format will default to
2ch PCM via the remote control.
Microphone Setup
The microphone and background mixing can be adjusted via the remote control.
To enable microphone and background audio mixing select the Mix On button.
To disable microphone mixing select the Mix O button.
To play the microphone audio only select the Mic Only button.
The remote also features the ability to adjust the volume of the microphone input.
Volume Control
Here you can increase or decrease the volume as well as mute all audio output.
VOLUME
EDID
SOURCE
AUDIO
MIC
To Next Page
Loading...
Need help?
General
