contact support@blustream.com.au | support@blustream.co.uk
MFP62 USER MANUAL
07
The MFP62 features IR input for control and switching.
IMPORTANT: Blustream Infrared products are all 5V and NOT compatible with alternative manufacturers Infrared
solutions. When using third party 12V IR control solutions please use Blustream IRCAB cable for IR conversion.
Each Blustream product is supplied with all necessary IR hardware required and includes:
IR Emitter - IRE1 & IRE2
Blustream 5V IR Emitter designed for discrete IR control of
hardware
IR Receiver - IRR
Blustream 5V IR receiver to receive IR signal and distribute
through Blustream products
IR Control Cable - IRCAB
Blustream IR Control cable 3.5mm Mono to 3.5mm Stereo
for linking third party control solutions to Blustream
products.
Compatible with 12V IR third party products.
Note: Cable is directional as indicated
Infrared 3.5mm Pin-Out
IR Emitter - Mono 3.5mm
IR Receiver - Stereo 3.5mm
Infrared (IR) Distribution
Signal
Ground
Signal
5V
Ground
To Next Page
Loading...
Need help?
General
