BluStream MX44AB-V2 - Web Browser Interface Control; PC Configuration Software

MX44AB-V2 USER MANUAL
15
contact support@blustream.co.uk / support@blustream.com.au
Blustream PC Configuration Soware
The Blustream MX44AB-V2 matrix units can be configured using the Blustream matrix PC configuration soware.
Please download the specific soware and PC soware manual at the following link:
http://www.blustream.co.uk/mx44abv2
Blustream Web Browser Interface
The Blustream MX44AB-V2 Matrix unit can be both controlled and configured using the in-built web-server.
The MX44AB-V2 Matrix must be connected to an active network router/switch and it is advised that the Matrix is
given a static IP address. You can configure the network settings of the Matrix using either the Web Browser Interface
(Blustream Matrix products are shipped with the network set to DHCP) or using the Blustream PC Configuration
Soware (downloadable from the Blustream Drivers & Protocols link on the product web page).
For detailed instructions on using the Blustream Web Browser Interface please download the specific soware
manual at the following link:
http://www.blustream.co.uk/mx44abv2