BluStream MX44AB-V2 User Manual

MX44AB-V2 USER MANUAL
06
www.blustream.co.uk
Matrix Front Panel Control
Front Panel Display - Input/Output selection
The following display shows current source input selection per zone output.
1. To change input selection first press ‘OUTPUT’ button (1-4)
2. Press desired ‘INPUT’ button (1-4)
OUT 1 2 3 4
IN 1 2 3 4
EDID: IN ALL
HDMI: 1080P 2CH
EDID Management - Global or individual input settings
The following characters show adjusting the EDID for ‘All’ inputs (Global). Current EDID value is set to 1080P & 2ch audio.
To change the input signal type using the Matrix front panel buttons press the following:-
Using Matrix Front Panel Buttons
a. Press MENU button
b. Panel will display ‘EDID settings’. Press SELECT button
c. Select the input you wish to fix the EDID on (1-8) or select ‘All’. Use UP/DOWN buttons to toggle selection and SELECT button to
confirm
d. Select video resolution required (4K, 1080p, 3D etc). Use UP/DOWN buttons to toggle selection and SELECT button to confirm
e. Select audio resolution required (2CH, 5.1 or 7.1). Use UP/DOWN buttons to toggle selection and SELECT button to confirm
f. Press the ESC button to exit
2
1
TCP/IP
DC 12VIR Ext.
RS232
IR TX L/R In
HDMI 1 HDMI 2 HDMI 3 HDMI 4
Input
IR TX L/R In IR TX L/R In IR TX L/R In IR RX Coaxial
HDMI 1 HDMI 2 HDMI 3 HDMI 4
Output
L/R Out IR RX Coaxial L/R Out IR RX Coaxial L/R Out IR RX Coaxial L/R Out
EDID
MX44AB-V2
4x4 4K HDMI 2.0 Matrix - HDCP 2.2

BluStream MX44AB-V2 Specifications

General

Brand	BluStream
Model	MX44AB-V2
Category	Matrix Switcher
Language	English