BMC E-20C-H-O User Manual

E-20C-H-O / E-20CJ-H-O User Manual V2.1
6 / 35
7. Glossary
Apnea
A condition marked by the cessation of spontaneous breathing.
Auto Off
When this feature is enabled, the device automatically discontinues therapy whenever the
mask is removed. This feature is only available for E-20C-H-O.
Auto On
With this feature, the device automatically initiates therapy when you breathe into the mask.
This feature is always enabled. This feature is only available for E-20C-H-O.
CPAP
Continuous Positive Airway Pressure.
iCode
A feature that is intended to give access to compliance and therapy management information.
The “iCode” consists of six separate codes displayed in the Patient Menu. iCode QR displays
sequences of characters, and iCode QR + displays two-dimensional codes.
LPM
Liters Per Minute.
OSA
Obstructive Sleep Apnea.
Patient Menu
The display mode in which you can change patient-adjustable device settings, such as the
starting pressure for the Ramp feature.
Ramp
A feature that may increase patient comfort when therapy is started. It can reduce pressure
and then gradually increase the pressure to the prescription setting so the patient can fall
asleep more comfortably.
Reslex
A therapy feature that is enabled by your home care provider to provide pressure relief
during exhalation.
Standby State
The state of the device when power is applied but the airflow is turned off.
min
Means the time unit “minute”.
h
Means the time unit “hour”.
yy mm dd / mm dd yy / dd mm yy
Means the date.

BMC E-20C-H-O Specifications

General

Brand	BMC
Model	E-20C-H-O
Category	Medical Equipment
Language	English