Press button 1 briefly to select
the display in the field 2.
The following values can be dis-
played:
Trip distance 1 (Trip 1)
Trip distance 2 (Trip 2)
Auto trip distance (Trip A),
is automatically reset once
6 hours have passed since op-
erating readiness was switched
off.
Setup menu (Setup)
Press button 1 briefly to select
the display in the field 2. The
following average values can be
reset:
Average consumption
Range gain
Total consumption
Total energy recovery
Time travelled at at least
10 km/h
Operating period
Average speed
Eco points
Resetting trip distance
recorder
Switch on operational readi-
ness ( 40).
Select distance recorder de-
sired.
Press button 1 briefly to se-
lect the desired trip distance
recorder.
Press and hold down button 1
until the trip distance recorder
reading in field 2 is reset.
4
47
z
Operation
To Next Page
Loading...
