Mirrors
Adjusting mirrors
Pivot the mirror to the correct
position by pressing gently at
the edge.
Headlight
Headlight beam throw and
spring preload
Headlight beam throw is gener-
ally kept constant when spring
preload is adjusted to suit load.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer, if you are
unsure whether the headlight
beam-throw setting is correct.
Brakes
Adjusting brake lever
WARNING
Adjusting the handbrake
lever while riding.
Risk of accident
Do not attempt to adjust the
handbrake lever unless the
Scooter is at a standstill.
Turn adjusting screw 1 of the
left brake lever or adjusting
screw 2 of the right brake lever
to the desired position.
NOTICE
The adjusting screw is easier to
turn if you push the brake lever
forward.
Adjustment options:
From position 1: largest span
between handlebar grip and
brake lever
To position 5: smallest span
between handlebar grip and
brake lever
Spring preload
Adjustment
It is essential to set spring pre-
load of the rear suspension to
suit the load carried by the E-
Scooter. Increase spring pre-
load when the vehicle is heavily
loaded and reduce spring preload
accordingly when the vehicle is
lightly loaded.
5
56
z
Adjustment
To Next Page
Loading...
