BMW C evolution - Charging Process

DANGER
Use of damaged charging
cable.
Injury or damage to property, e.g.
by electric shock or fire.
Do not use a damaged char-
ging cable.
Immediately remove a dam-
aged charging cable (housing
or cable) from service.
NOTICE
Always fit the protective cap to
the on-vehicle connector to keep
out moisture and dirt.
Use a standard charging cable,
Mode3 charging cable or per-
manently installed cable of a
charging station to charge the
vehicle's high-voltage battery
unit. The charging cable can be
stowed in the rear stowage com-
partment.
Standard charging cable
You can use the standard char-
ging cable to charge by connect-
ing to a household socket with
protective earth. Connected to a
household socket as power sup-
ply, charging is with alternating
current.
1: Charging current
2: Monitoring of the wall socket
for incorrect wiring and connec-
tion to protective earth
3: Adjusting the charge current
4: Monitoring of the protective
earth and communication with
the E-Scooter
with Mode3-charging cable
OA
Mode3 charging cable
The Mode3 charging cable has
a special plug for safe charging
at the sockets of charging sta-
tions accessible to the public.
Charging is faster than at house-
hold sockets. Charging stations
sometimes have permanently in-
stalled Mode3 charging cables.
Charging process
Before charging
DANGER
Non-compliance with the
safety information for the
electrical outlet.
Injury or damage to property, e.g.
by electric shock or fire.
Comply with the safety instruc-
tions for the electricity outlet
you are using.
6
63
z BMW ePOWER