BMW C1 - Wiper Blade Replacement; Wiper Blade Change Procedure

2
28
Maintenance and care
Changing wiper blade
L
Note:
Wiper blade 1 is asymmetric.
Changing wiper blade
• Place the BMW C1 on its
stand
– after making sure that the
ground is level and firm
• Remove spray nozzle 3 from
wiper blade 1
• Swing wiper arm 4 clear of
windscreen
• Hold wiper blade 1 at a right
angle to wiper arm 4 and
release it from latch 5 by
pushing it toward the wiper
arm
• Disengage wiper blade 1 and
lift it up to remove
• Insert new wiper blade 1 and
make sure it engages with an
audible click
– Make sure that long
section B of wiper blade is
toward the right
4
3
1
5
2
B
