BMW C1 - Changing Bulbs; Rear Turn Indicators

2
31
Maintenance and care
Changing bulbs
Rear turn indicators
e
Important:
Always switch off the ignition
before changing bulbs.
L
Note:
Do not touch the glass of new
bulbs with the fingers. Use a
clean, dry cloth to hold the
bulbs when inserting them.
• Place the BMW C1 on its
stand
– after making sure that the
ground is level and firm
• Take out retaining screw 1
• Take off turn indicator glass 2
• Press bulb 3 in and turn it
counter-clockwise to disen-
gage it from the socket
• Take out bulb 3
• Installation is the reverse of
the removal procedure
– Rear turn indicator bulbs:
12 V 10 W
3
1 2
