If no clear resistance points can
be felt or if the Maxi-Scooter can
be pushed:
Have the brakes checked at an
authorized workshop, preferably
an authorized BMW Motorrad
retailer.
Check front brake pad
thickness
Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.
Conduct a visual inspection
of the brake pad thickness.
Viewing direction: left and
right between wheel and front
suspension toward brake
pads 1.
Front brake-pad wear
limit
min 0.04 in (min 1.0 mm)
(Only friction material without
carrier plate. Wear markings
(grooves) must be clearly visi-
ble.)
If the wear indicators are no
longer clearly visible:
WARNING
Dropping below the minimum
pad thickness.
Reduced braking action. Damage
to the brake.
8
87
z
Maintenance
To Next Page
