In order to ensure the operat-
ing reliability of the brake sys-
tem, make sure that the brake
pads are not worn beyond their
minimum thickness.
Have brake pads replaced at
an authorized service facil-
ity, preferably an authorized
BMW Motorrad retailer.
Checking rear brake pad
thickness
Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.
Conduct a visual inspection of
the brake pad thickness. View-
ing direction: from lower right
toward brake pads 1.
Rear brake-pad wear
limit
min 0.04 in (min 1.0 mm)
(Only friction material without
carrier plate.)
If the wear indicating marks are
no longer visible:
WARNING
Dropping below the minimum
pad thickness.
Reduced braking action. Damage
to the brake.
8
88
z
Maintenance
To Next Page
