12
SERVICE AND MAINTENANCE
Periodical service and maintenance procedures are listed below.
The marking indicates that the procedure in question requires special tools and
certain knowledge and should be left to your authorized BMW Marine Dealer.
Jobs to be done Engine hours Page
Oil level check Daily 16
Oil change, engine 50 or once yearly
First change after 10 hours
16
Oil change, gearbox 150 or once yearly 16
Fuel primary filter, draining Every two weeks 13
Fuel primary filter, cartridge replacement 100 or once yearly 13
Fuel screen cleaning (inside the feed pump) 100 or once yearly 13
Air filter, replacement 100 or once yearly 15
Tappet clearance, checking/adjusting 100 or once yearly 19
Injector, cleaning When necessary 14
Sacrificing anodes, checking/replacing Replaced once yearly 18
Impeller, raw water pump checking/replacing 100 or once yearly 17
Decompression valve, adjusting
100 or whenever tappet
clearance is altered
19
To Next Page
Loading...
