2
18
Maintenance and care
Auxiliary stand
• Position the auxiliary stand at
sockets 1 on left and right
• Press and hold down pin 2
– The ball latch is disengaged
• Press the auxiliary stand into
sockets 1 and release pin 2
– The ball latch engages
• Check that the auxiliary stand
is firmly secured
Removing the auxiliary stand
• Extend the side stand before
removing the auxiliary stand
• Removal of the auxiliary stand
is the reverse of the installa-
tion procedure
1
2
20K14bkg3.book Seite 18 Mittwoch, 19. Mai 2004 11:57 11
To Next Page
