2
27
Maintenance and care
L Note:
When removing the silencer, do
not damage the wheel rim; ap-
ply masking tape to the rim if
necessary.
d Warning:
Remove the silencer only
when it is cold.
Make sure that the motorcy-
cle is standing firmly and can-
not topple to the rear or to
either side.
• Place the motorcycle on the
auxiliary stand
– Make sure the ground is
level and firm.
• Unfasten securing screw 2 of
clamp
• Remove securing screw 1
from frame
• Remove silencer
2
1
Removing rear wheel
20K14bkg3.book Seite 27 Mittwoch, 19. Mai 2004 11:57 11
To Next Page
Loading...
