BMW F 650 CS User Manual

2
33
Maintenance and care
Rear brake
e Attention:
Have brake pads replaced be-
fore the minimum permitted
thickness is reached.
L Note:
For your safety, we recommend
having work on the brake sys-
tem performed by a specialist
workshop, preferably an author-
ised BMW motorcycle dealer.
• Prop the motorcycle on its
side stand
– Make sure the ground is
level and firm.
• Visually inspect from behind
• Check the thickness of the
brake pads
Minimum pad thickness:
Angled wear indicating mark
1 must be clearly visible on
the pads.
– If the wear indicating mark is
no longer visible:
have the brake pads replaced
by a specialist workshop,
preferably an authorised
BMW motorcycle dealer.
Checking brake pads
1
20K14bkg3.book Seite 33 Mittwoch, 19. Mai 2004 11:57 11

BMW F 650 CS Specifications

General

Displacement	652 cc
Bore x Stroke	100 mm x 83 mm
Compression Ratio	11.5:1
Transmission	5-speed
Final Drive	Chain
Front Suspension	Telescopic fork
Seat Height	780 mm (30.7 in)
Engine Type	4-stroke, single cylinder
Power	50 hp (37 kW) @ 6, 500 rpm
Fuel System	Fuel injection
Front Brakes	Single disc
Rear Brakes	Single disc
Fuel Capacity	15 liters (4.0 US gal)