Average speed
Average consumption
Range
Ambient temperature
When the motorcycle is stopped,
the engine heat can falsify the
measurement of the ambient
temperature. If the influence of
the engine heat becomes too
great,
-- is temporarily shown in
the display.
If the ambient temperature drops
below 3 °C, the temperature dis-
play flashes as a warning of pos-
sible icing-up. The display auto-
matically switches from any other
mode to the temperature read-
ing when the temperature drops
below this threshold for the first
time.
Average speed
The average speed is calculated
based on the elapsed time since
the last reset. Times during
which the engine was stopped
are excluded from the calculation.
Resetting average speed
Switch on ignition.
Select average speed.
Hold down button 1.
Average speed is reset.
Average consumption
The average consumption is cal-
culated by dividing the distance
covered since the last reset by
4
42
z
Operation
To Next Page