the corresponding amount of fuel
used.
Resetting average
consumption
Switch on ignition.
Select average consumption.
Hold down button 1.
Average consumption is reset.
Range
The range indicates what dis-
tance can still be driven with the
remaining fuel. The calculation is
made based on the fuel level and
an average consumption stored
for this purpose, however which
need not always match the val-
ue that can be called up in the
display.
With a completely filled fuel tank,
the fuel volume cannot be deter-
mined exactly. In this area a min-
imum range is indicated, marked
with a
> symbol. As soon as the
fuel level can be determined ex-
actly, the range is shown more
precisely.
If the motorcycle is standing on
the side stand, the fuel level can-
not be correctly determined due
to the inclined position. For this
reason the range is only calculat-
ed while driving.
When refueling after running on
reserve, make sure that you top
up the tank to a level above re-
serve, as otherwise the sensor
will not be able to register the
new level. Otherwise neither the
fill level nor the range display can
be updated.
The determined range is an
approximate reading. BMW
Motorrad therefore recommends
that you do not try to use the full
range before refueling.
4
43
z
Operation
To Next Page