31
Maintenance and care
2
4 53
6
7
Installing the rear wheel
• Hand-tighten central screw 7
with taper ring 6
• Hand-tighten four wheel
studs 3 with taper rings 4 and
tighten to preload torque in
diagonally opposite sequence
• Tighten central screw 6 to its
specified torque
• Tighten the four wheel studs 4
in diagonally opposite
sequence to the specified
torque
Always have the tightening
torques checked by a BMW-
certified workshop, preferably
an authorized BMW motorcycle
retailer.
X Tightening torque:
Preload torque
Wheel studs 3 ............... 50 Nm
Final tightening torque
Wheel studs 3 ............. 105 Nm
Central screw 7 ........... 105 Nm
20LTbku7.book Seite 31 Montag, 4. Juli 2005 9:27 09
To Next Page
