New Generation N62 Engine Chapter 3 P.30
Course Contents/Background Material
© BMW AG, Service Training
- Cylinder head covers
Fig. 24: Cylinder head cover
The cylinder head covers are made from plastic. The sleeves for
threading the ignition coil rods are inserted into the cylinder
head through the cylinder head cover (nos. 1-4).
Index Description
1-4 Apertures for the ignition coil rods
5 Crankcase venting system pressure control valve
6 Opening for Valvetronic motor
7 Opening for Valvetronic sensor connector
8 Camshaft sensor
KT-7711
To Next Page
Loading...
