bObsweep Bob PetHair Plus - Cleaning Bobs Filters

Quick Start
Maintenance
Filters
Mesh Filter (Filter Frame)
For larger particles
High-Efciency Filter
For ne particles
Electrostatic Filter
For smaller particles
Filters
To maximize Bob’s efciency, it is best to clean his lters about once a week and replace them about
once every 6 months. 3 lters are located inside the roof of the dustbin. These lters capture ne
particles and prevent them from escaping the dustbin.
1. Push the button on Bob’s back and slide
the dustbin out.
4. Replace the lters and slide the
dustbin back into Bob.
3. Remove the lters and brush them with
Bob’s cleaning tool.
Cleaning Bob’s Filters
2.
Pull out the lter frame from the roof of
the dustbin.
Quick Tip:
Never ll the dustbin with
water or any other liquid.
Parts You’ll Need: Cleaning Tool
5453