Quick Start
Maintenance
Main Brush
Main Brush
To maximize Bob’s efciency, it is best to clean his main brush about once a week.
Parts You’ll Need: Flat Head Cleaning Tool
Screwdriver
Cleaning Bob’s Main Brush
1.
Remove the screw on the main brush
using a at head screwdriver.
2. Clean the brush and the brush compartment
from end to end using Bob’s cleaning tool.
3. When done, replace the brush cap and insert the square end of the brush into the square
notch inside Bob. Lastly, replace the screw.
You may use scissors to cut away
entanglements of hair, or tweezers to
unclog the notches inside Bob.
Quick Tip:
5655
To Next Page
Loading...
