Quick Start
Maintenance
Side Brush
Side Brush
To maximize Bob’s efciency, it is best to clean his side brush about once a week.
1. Remove the screw on the side brush using
a at head screwdriver.
3. When done, replace the side brush and screw.
2. Clean the brush and the brush socket using
Bob’s cleaning tool.
Cleaning Bob’s Side Brush
Parts You’ll Need:
Flat Head Cleaning Tool
Screwdriver
You may use scissors to cut away
entanglements of hair, or tweezers to
unclog the notches inside Bob.
Quick Tip:
5857
To Next Page
Loading...
