EasyManua.ls Logo

Böcker LMX 500 - Transport; Conditions of Transport; Transportation Risks

Böcker LMX 500
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Material Lift LMX / LHX
105000017
5
2 Transport
2.1 Conditions of transport
In order to prevent damage or life-threatening injuries during the transport of the material and
installation lifts, it is imperative that the following points are observed:
Transport works must only be carried out by qualified personnel in accordance with the
safety instructions and in compliance with the unladen weight of the material-installation
lift, using a sufficient number of people.
For the transportation of the material-installation lifts and associated component parts
only appropriate means of transport and suitable load handling attachments and lifting
tackle must be used.
Prior to moving, check if any potential parking brakes must be released. After relocating,
the parking brakes must be applied.
During transport, the permitted floor load must be observed!
It is generally prohibited to be positioned below suspended loads!
Ensure that your vehicle is suitable for the transportation of these material-installation
lifts. Check if your load securing equipment (e.g. lashing straps) is sufficient to
appropriately secure the load. The loading process must only be carried out on level
surfaces.
The material-installation lifts must be sufficiently secured on the loading area of your
vehicle.
The integrated wheels in the front parts are not designed for bearing permanent loads!
2.2 Transportation risks
During the transport of the material-installation lifts, the following specific hazards must be
expected:
Improper moving of the material lifts may result in injury to persons or damage to objects.
To prevent accidents, always ensure that you have a clear view in the driving direction
and that there are no people in the transport area. Depending on the circumstances, at
least one further person is required for safety purposes.
If the proper load handling equipment is not used, the material-installation lift may be
severely damaged.
Should a component of the material lift be damaged or disabled during transport,
commissioning of the material-installation lift is not permitted, as the consequences are
not calculable. The lift may only be commissioned when the damage has been properly
repaired.
Make sure that all parking brakes have been engaged after transportation, as the
material lift could otherwise begin to move automatically.

Related product manuals