LHX:
During each transport where the material and
installation lift LHX is lying on its side, the
hydraulic tank must also be closed by means of
the block tap (Fig. 2.1).
CAUTION!
If the tank is not closed, oil will leak out!
After unloading from the transport vehicle or during the removal of the material lift from the
storage site, move it with the black wheels (ø250mm ).
For this purpose, carefully tilt the material lift backwards (hoist side) and let it onto the wheels
(ø250mm ). Keep the material lift balanced in this transport position.
CAUTION!
Caution at sharp gradients. The operator must always stand on the sloping side. Potentially
wheel the unit around using 2 persons.
To Next Page
Loading...
