Operation
BOMAG
24
BPR 35/40 D BPR 35/60 D
Fig. 13
l Slightly pull the starter handle (Fig. 13), until
resistance can be felt (compression pressure),
but do not pull out completely.
l Guide the starter rope back by hand.
Fig. 14
l Pull the rope by the starter handle quickly and
powerful as far out as possible (Fig. 14).
i
Note
Do not let the starter handle hit back against the
engine.
l If the engine does not start during the first at-
tempt, repeat the starting process.
Fig. 15
l Run the engine warm for approx. 1 to 2 min-
utes in idle speed.
Go to Discount-Equipment.com to order your parts
To Next Page
